Comparison

Traditionally, skatepark ramp builders and designers have had a homeremodeler's mindset with the construction of a skatepark equipment.

Most ramp companies produce wood based ramps, some with modified skating surfaces of steel, masonite or Skatelite. Wood is easily milled and fabricated, however, these structures are by far not permanent park equipment. 

As wood playscapes built in the past ten years are being replaced with steel and plastic, skateparks are suffering a similar fate, Wood, especially plywood, will not last when exposed to weather and use.

Rampage equipment is constructed with an all steel frame, with a steel or Skatlite Pro skating surface. These structures are permanent playground equipment with a likeness to those timeless pipe and chain swingsets found throughout the country

Rampage offers a five-year warranty on all equipment and a ten year warranty on the structure. The useful life of these ramps will reach through generations of skaters.

We are very proud of our engineering and the quality of our constructionWe regard every park as a personal accomplishment.

COMPARE A WOOD STRUCTURE WITH STEEL

COMPARE THESE THREE YEAR OLD RAMPS

PROFESSIONALLY BUILT AND INSTALLED SKATEPARK BUILT JULY 1999

RESULTING CONDITION JULY 2000 ONE YEAR LATER

BANK ANGLE TO DECK --- NO GRIND EDGE

1/2PIPE FLATS --- NO STEEL EDGE

RAMPAGE EQUIPMENT

STEEL GRIND EDGES SURROUND THE SKATING SURFACE TO PROTECT THE EDGES AND TO PROVIDE A GRIND SURFACE. THESE EDGES ARE FASTENED FLUSH TO THE SKATING SURFACE WITH STAINLESS STEEL BOLTS AND NUTS NOT SCREWS

STEEL THRESHOLD SEPERATED AND THINNER THAN THE SKATING SURFACE

WOOD STRUCTURE WITH WOOD REAR REAR RAILING

GALVANIZED STEEL SAFETY RAILINGS SURROUND THE 4' DECK ON THREE SIDES. SIDE RAILINGS ARE 12" AWAY FROM THE COPING RAILINGS AND SKATING SURFACES ARE BOLTED TO THE STEEL FRAME